The 3M 6035 Cartridge Filter is one of the 3M 6000 series of filters that can be used in a variety of applications. This versatile filter can be used on all 3M 6000, 7000 & 7500 series half masks and full face masks. Note that the 3M 6035 Cartridge Filter provides P3 protection with a full face respirator and P2 protection with a half face respirator. When selected and used in accordance with AS/NZS 1715, the 3M 6035 Cartridge Filter is capable of providing protection against particulates at levels up to 10 times the Exposure Standard on a half face mask and up to 100 times the Exposure Standard on a full face mask.
The 3M 6059 Gas and Vapour Cartridge protects against organic vapours. Suitable for 3M 6000 and 3M 7000 Series Half and Full Face Masks.
Typical industrial applications for filters are: Anywhere conventional paints are used (subject to usage conditions),vehicle manufacture, aircraft manufacture and refurbishment, boat building, ink and dye manufacturer and use, adhesive manufacturer and use, paint and varnish manufacturer, resin manufacturer and use, acid cleaning, metal pickling, metal etching, manufacturer and maintenance of refrigeration equipment, agro chemicals, chemical manufacture and handling.
When used with 3M full facepieces, provide approved protection against dusts, mists and fumes as a P3 filter. Also approved for agricultural chemicals having low vapour pressure (less than 1.3 Pa at 25°C). Minimises ozone and provides relief from nuisance. NOTE: This disc filter provides GP3 protection only with full facepiece respirator. Provides GP2 protection with half facepiece respirator.
NOTE: The 3M™ Disc Filter 2138 provides GP3 protection only with full facepiece respirator. Provides GP2 protection with half facepiece respirator
Provides protection against: Organic Vapours (boiling point > 65?C) (A1).
3M™ Bayonet Connection System ensures precise and secure locking
Low profile and well balanced twin filter design
Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Common Applications/Hazards: For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK. Also degreasing, mixing, using paint thinner, lacquers and glues.
Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: - With a 3M 6000/7500 Series Half Face Respirator: for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower - With a 3M 6000/7800 Series Full Face Respirator: 50 x WES or 1000 ppm, whichever is the lower
The 3M particulate filter 5925, P2 can be used in industries where excess levels of particulates are present in the workplace atmosphere where gas/vapour protection is also required. It is designed for use with 3M 6000 Series Cartridges with the 501 Filter Retainer.
The 3M Full Face Reusable Respirator 6000 Series is simple to use and comfortable to wear. Combine with a broad range of twin, lightweight 3M filters or cartridges to provide respiratory protection against particulates and a variety of gases and vapours.
The 3M™ Half Face Reusable Respirator 6000 Series is low-maintenance, simple to use and extremely lightweight. Combine with a broad range of twin, lightweight 3M™ filters or cartridges to provide respiratory protection against particulates and a variety of gases and vapours.
The 3M™ Half Face Reusable Respirator 7500 Series has a soft, silicone face seal for greater comfort and durability. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduce heat and moisture build-up for cool, dry comfort
Soft, silicone facepeice for comfort and durability
Drop down feature for added convenience during breaks
Thin nose bridge area for reduced pressure and improved comfort
3M Particulate Filter GP2, Acid Gas & Organic Vapours: Pair
The 3M 2128 GP2 Particulate Filter is one of the 3M 2000 series of filters that provide a lightweight filter option for 3M Half and Full Face respirators. For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure
The 3M 2125 Particulate Filter is one of the 3M 2000 series of filters that offers a lightweight filtration option for 3M half and full face respirators. This filter features advanced Electret Media for optimised filtration efficiency and is a lighter alternative to other filters that provide comparable protection. When used in accordance with AS/NZS 1715, the 3M 2125 Particulate Filter is capable of providing protection from particulates at levels of up to 10 times the exposure standard on a 3M half face mask and up to 50 times the exposure standard on a 3M full face mask.
This filter is able to be used for protection against mechanically and/or thermally generated particulates such as welding fumes, dusts, smoke and biological agents.
The 3M™ Rugged Comfort Quick Latch Half Facepiece Reusable Respirator. This facepiece combines comfort, durability, and stability. The proprietary quick latch design offers an easy, one-hand touch drop-down mechanism for putting the facepiece on and/off while moving in and out of contaminated areas.
Assembled Silicone Half Mask & P2/P3 Press to Check Filters
The Silicone Half Mask offers superior low breathing resistance and a 4-point suspension harness with quick release buckles. The mask is made with durable silicone offering a superior fit to most face shapes. Included is a pair of Press To Check filters, which by pressing down on whilst attached to your half mask, no air should be able to enter through or around the mask. If you find that air is coming through into or around the mask, adjust the mask and repeat until you have a secure fit.
The Scott Safety ELSA constant flow breathing apparatus is an escape breathing apparatus which provides a constant supply of air for rapid escape from hazardous industrial and marine environments.
The ELSA is simple and quick to operate, reliable and robust in use, ensuring maximum protection in an escape situation.
The ELSA is available in durations of 10 or 15 minutes in high visibility PVC or black anti-static polyurethane materials. The ELSA apparatus consists of a cylinder with combined cylinder valve and reducer, supply hose to constant flow hood and storage bag.
The ELSA is activated upon opening the bag whereby a pin which is attached to the bag via a strap is released.
The Scott Safety Flite is an open circuit, positive pressure airline breathing apparatus generally comprising of a bandolier harness, positive pressure airline apparatus with automatic positive pressure demand valve, supply hose and coupling for airline supply hose.
An additional coupling allows the connection of an emergency air supply cylinder which provides an independent air supply with a duration of 10 to 15 minutes, dependant on cylinder size.
The apparatus can be used with the full range of Scott Safety positive pressure face masks as well as the Elsa positive pressure hood when used as an escape only apparatus.
Press To Check P2/P3 Filters To Suit HMTPMS (Pair)
Press To Check filters allow self-assessment of your half mask’s fit and seal when used with the ‘HMTPMS – Silicone Half Mask Respirator’. By pressing down on the filters while attached to your half mask, no air should be able to enter through or around the mask. If you find that air is coming through into or around the mask, adjust the mask and repeat until you have a secure fit.
The FilterSpec™ Pro is a goggle and mask in one! The Goggle / Mask Combo enhances fit, breathing resistance and filtration efficiency due to the optimal seal created, which cannot be duplicated when used as an individual goggle and respirator.
Pack includes black holder, 3x filters and goggle with Clear HC & Anti-Fog Lens.
The Scott Safety Promask RAS is available in different sizes and will accommodate a wide range of facial shapes and sizes.
The face masks are positive pressure and feature a Butyl Rubber (Procomp™) outer mask with reflex seal and silicone ori-nasal inner mask.
The facepiece visor is single curvature and made of a scratch and impact resistant polycarbonate material with a flame-retardant coating and provides excellent panoramic vision. The visor is held in place by two U shaped clamps.
The mask will allow the wearer to wear integrated spectacle frames, without compromising the face mask seal. The mask is available with either a five-point fully adjustable neoprene strap style harness or a two-point adjustable Polyester or Kevlar™ net style harness. The face mask features a left hand side bayonet connection for the demand valve. It also features a right sided DIN40 threaded connection which enables the fitting of a standard filter canister.
A speech diaphragm is mounted at the front of the mask to offer unimpeded speech transmission and there is a low resistance positive pressure exhalation valve that allows for normal breathing with no extra effort. The mask is designed with separate inspiratory and expiratory paths to minimise the risk of cross contamination of second stage regulators.
The ProMesh P2 Respirator Mask features flexible mesh which ensures optimum shape retention for a perfect, airtight fit whilst protecting against nuisance-level organic vapours in addition to having a P2 rating.
The Silicone Half Mask Respirator is a one size fits all respirator mask that offers a fully adjustable four point cradle suspension ensuring a great fit. When paired with Press-To-Check Filters create a unique system, engineered to enable self-assessment of the Silicone mask’s seal for better protection every time you use it.