Scott Safety Promask PP LQF Full Face Respirator_2.jpg
Scott Safety

Promask PP LQF Full Face Respirator

Item Code: Promask PP LQF Full Face Respirator

Dispatch: TBA

The Scott Safety Promask RAS is available in different sizes and will accommodate a wide range of facial shapes and sizes.

The face masks are positive pressure and feature a Butyl Rubber (Procomp™) outer mask with reflex seal and silicone ori-nasal inner mask.

The facepiece visor is single curvature and made of a scratch and impact resistant polycarbonate material with a flame-retardant coating and provides excellent panoramic vision. The visor is held in place by two U shaped clamps.

The mask will allow the wearer to wear integrated spectacle frames, without compromising the face mask seal. The mask is available with either a five-point fully adjustable neoprene strap style harness or a two-point adjustable Polyester or Kevlar™ net style harness. The face mask features a left hand side bayonet connection for the demand valve. It also features a right sided DIN40 threaded connection which enables the fitting of a standard filter canister.

A speech diaphragm is mounted at the front of the mask to offer unimpeded speech transmission and there is a low resistance positive pressure exhalation valve that allows for normal breathing with no extra effort. The mask is designed with separate inspiratory and expiratory paths to minimise the risk of cross contamination of second stage regulators.

Call for availability


The Promask RAS is specifically designed for use with the Scott Safety range of breathing apparatus from SCBA through to Airline breathing apparatus range. Inconjunction with Scott Safety breathing apparatus. It is suitable for providing respiratory protection in an IDLH (Immediately Dangerous to Life and Health) environment.

  • Outer Mask: Butyl Rubber (ProcompTM)
  • Inner Mask: TPE
  • Head Harness: 5 point Neoprene, net head harness in polyester or Kevlar material
  • Inhale Valve Flaps: Silicone
  • Exhale Valve Flaps: Polyisoprene rubber
  • Visor: Polycarbonate
  • Exhale Valve Housing: Polyamide
  • Exhale Valve Spring: Stainless Steel
  • Screws: Stainless Steel
  • Buckles: Polyamide
  • Demand Valve Port: Glass Filled Polyamide

Certified to AS/NZS 1716:2012